Altimetric sampling and mapping procedures induce spatial and temporal aliasing of the signal – characteristics of these aliasing effects in the Mediterranean Sea

International audienceThis study deals with spatial and temporal aliasing of the sea surface signal and its restitution with altimetric maps of Sea Level Anomalies (SLA) in the Mediterranean Sea. Spatial and temporal altimetry sampling, combined with a mapping process, are unable to restore high-frequency (HF) surface variability. In the Mediterranean Sea, it has been shown that signals whose intervals are less than 30–40 days are largely underestimated, and the residual HF restitution signal contains characteristic errors which make it possible to identify the spatial and temporal sampling of each satellite. The origin of these errors is relatively complex. Three main effects are involved: the sampling of the HF long-wavelength (LW) signal, the correction of this signal's aliasing and the mapping procedure. – The sampling depends on the characteristics of the satellites considered, but generally induces inter-track bias that needs to be corrected before the mapping procedure is applied. – Correcting the aliasing of the HF LW signal, carried out using a barotropic model output and/or an empirical method, is not perfect. In fact, the baroclinic part of the HF LW signal is neglected and the numerical model's capabilities are limited by the spatial resolution of the model and the forcing. The empirical method cannot precisely control the corrected signal. – The mapping process, which is optimised to improve restitution of mesoscale activity, does not propagate the LW signal far from the satellite tracks. Even though these residual errors are very low with respect to the total signal, their signature may be visible on maps of SLAs. However, these errors can be corrected by more careful consideration of their characteristics in terms of spatial distribution induced by altimetric along-track sampling. They can also be attenuated by increasing the altimetric spatial coverage through the merging of different satellites. Ultimately, the HF signal, which is missing in maps of SLA, can be completed using a numerical model in order to estimate the total surface signal. The barotropic HF (<30 days) component accounts for nearly 10% of the total variability. Locally, it contributes nearly 25% of the total variance

Improved global sea surface height and current maps from remote sensing and in situ observations

We present a new gridded sea surface height and current dataset produced by combining observations from nadir altimeters and drifting buoys. This product is based on a multiscale and multivariate mapping approach that offers the possibility to improve the physical content of gridded products by combining the data from various platforms and resolving a broader spectrum of ocean surface dynamic than in the current operational mapping system. The dataset covers the entire global ocean and spans from 1 July 2016 to 30 June 2020. The multiscale approach decomposes the observed signal into different physical contributions. In the present study, we simultaneously estimate the mesoscale ocean circulations as well as part of the equatorial wave dynamics (e.g. tropical instability and Poincaré waves). The multivariate approach is able to exploit the geostrophic signature resulting from the synergy of altimetry and drifter observations. Sea-level observations in Arctic leads are also used in the merging to improve the surface circulation in this poorly mapped region. A quality assessment of this new product is proposed with regard to an operational product distributed in the Copernicus Marine Service. We show that the multiscale and multivariate mapping approach offers promising perspectives for reconstructing the ocean surface circulation: observations of leads contribute to improvement of the coverage in delivering gap-free maps in the Arctic and observations of drifters help to refine the mapping in regions of intense dynamics where the temporal sampling must be accurate enough to properly map the rapid mesoscale dynamics. Overall, the geostrophic circulation is better mapped in the new product, with mapping errors significantly reduced in regions of high variability and in the equatorial band. The resolved scales of this new product are therefore between 5 % and 10 % finer than the Copernicus product (https://doi.org/10.48670/moi-00148, Pujol et al., 2022b).</p

Use of satellite observations for operational oceanography: recent achievements and future prospects

The paper gives an overview of the development of satellite oceanography over the past five years focusing on the most relevant issues for operational oceanography. Satellites provide key essential variables to constrain ocean models and/or serve downstream applications. New and improved satellite data sets have been developed and have directly improved the quality of operational products. The status of the satellite constellation for the last five years was, however, not optimal. Review of future missions shows clear progress and new research and development missions with a potentially large impact for operational oceanography should be demonstrated. Improvement of data assimilation techniques and developing synergetic use of high resolution satellite observations are important future priorities

Altimetry for the future: Building on 25 years of progress

In 2018 we celebrated 25 years of development of radar altimetry, and the progress achieved by this methodology in the fields of global and coastal oceanography, hydrology, geodesy and cryospheric sciences. Many symbolic major events have celebrated these developments, e.g., in Venice, Italy, the 15th (2006) and 20th (2012) years of progress and more recently, in 2018, in Ponta Delgada, Portugal, 25 Years of Progress in Radar Altimetry. On this latter occasion it was decided to collect contributions of scientists, engineers and managers involved in the worldwide altimetry community to depict the state of altimetry and propose recommendations for the altimetry of the future. This paper summarizes contributions and recommendations that were collected and provides guidance for future mission design, research activities, and sustainable operational radar altimetry data exploitation. Recommendations provided are fundamental for optimizing further scientific and operational advances of oceanographic observations by altimetry, including requirements for spatial and temporal resolution of altimetric measurements, their accuracy and continuity. There are also new challenges and new openings mentioned in the paper that are particularly crucial for observations at higher latitudes, for coastal oceanography, for cryospheric studies and for hydrology. The paper starts with a general introduction followed by a section on Earth System Science including Ocean Dynamics, Sea Level, the Coastal Ocean, Hydrology, the Cryosphere and Polar Oceans and the “Green” Ocean, extending the frontier from biogeochemistry to marine ecology. Applications are described in a subsequent section, which covers Operational Oceanography, Weather, Hurricane Wave and Wind Forecasting, Climate projection. Instruments’ development and satellite missions’ evolutions are described in a fourth section. A fifth section covers the key observations that altimeters provide and their potential complements, from other Earth observation measurements to in situ data. Section 6 identifies the data and methods and provides some accuracy and resolution requirements for the wet tropospheric correction, the orbit and other geodetic requirements, the Mean Sea Surface, Geoid and Mean Dynamic Topography, Calibration and Validation, data accuracy, data access and handling (including the DUACS system). Section 7 brings a transversal view on scales, integration, artificial intelligence, and capacity building (education and training). Section 8 reviews the programmatic issues followed by a conclusion

LLANO DE LOS JUNCOS. TEJEDA [Material gráfico]

Copia digital. Madrid : Ministerio de Educación, Cultura y Deporte, 201

Altimetry for the future: building on 25 years of progress

In 2018 we celebrated 25 years of development of radar altimetry, and the progress achieved by this methodology in the fields of global and coastal oceanography, hydrology, geodesy and cryospheric sciences. Many symbolic major events have celebrated these developments, e.g., in Venice, Italy, the 15th (2006) and 20th (2012) years of progress and more recently, in 2018, in Ponta Delgada, Portugal, 25 Years of Progress in Radar Altimetry. On this latter occasion it was decided to collect contributions of scientists, engineers and managers involved in the worldwide altimetry community to depict the state of altimetry and propose recommendations for the altimetry of the future. This paper summarizes contributions and recommendations that were collected and provides guidance for future mission design, research activities, and sustainable operational radar altimetry data exploitation. Recommendations provided are fundamental for optimizing further scientific and operational advances of oceanographic observations by altimetry, including requirements for spatial and temporal resolution of altimetric measurements, their accuracy and continuity. There are also new challenges and new openings mentioned in the paper that are particularly crucial for observations at higher latitudes, for coastal oceanography, for cryospheric studies and for hydrology. The paper starts with a general introduction followed by a section on Earth System Science including Ocean Dynamics, Sea Level, the Coastal Ocean, Hydrology, the Cryosphere and Polar Oceans and the “Green” Ocean, extending the frontier from biogeochemistry to marine ecology. Applications are described in a subsequent section, which covers Operational Oceanography, Weather, Hurricane Wave and Wind Forecasting, Climate projection. Instruments’ development and satellite missions’ evolutions are described in a fourth section. A fifth section covers the key observations that altimeters provide and their potential complements, from other Earth observation measurements to in situ data. Section 6 identifies the data and methods and provides some accuracy and resolution requirements for the wet tropospheric correction, the orbit and other geodetic requirements, the Mean Sea Surface, Geoid and Mean Dynamic Topography, Calibration and Validation, data accuracy, data access and handling (including the DUACS system). Section 7 brings a transversal view on scales, integration, artificial intelligence, and capacity building (education and training). Section 8 reviews the programmatic issues followed by a conclusion

Using High-Resolution Altimetry to Observe Mesoscale Signals

International audienceAn Ocean System Simulation Experiment is used to quantify the observing capability of the Surface Water and Ocean Topography (SWOT) mission and its contribution to higher-quality reconstructed sea level anomaly (SLA) fields using optimal interpolation. The paper focuses on the potential of SWOT for mesoscale observation (wavelengths larger than 100 km and time periods larger than 10 days) and its ability to replace or complement altimetry for classical mesoscale applications. For mesoscale variability, the wide swath from SWOT provides an unprecedented sampling capability. SWOT alone would enable the regional surface signal reconstruction as precisely as a four-altimeter constellation would, in regions where temporal sampling is optimum. For some specifics latitudes, where swath sampling is degraded, SWOT capabilities are reduced and show performances equivalent to the historical two-altimeter constellation. In this case, merging SWOT with the two-altimeter constellation stabilizes the global sampling and fully compensates the swath time sampling limitations. Benefits of SWOT measurement are more important within the swath. It would allow a precise local reconstruction of mesoscale structures. Errors of surface signal reconstruction within the swath represent less than 1% (SLA) to 5% (geostrophic velocities reconstruction) of the signal variance in a pessimistic roll error reduction. The errors are slightly reduced by merging swath measurements with the conventional nadir measurements